I have adjusted many model 700 triggers and find it to be pretty straight forward. The only thing that varies from trigger to trigger is the sear adjustment. I adjust all my triggers the same way, and for the same pull weight but each one seems to vary when trying to get them to pass the safety tests after sear adjustment. I am very strict on the safety tests when I adjust a "Remmy" trigger. I even go as far as putting the barrelled action in a chest freezer overnight and then re-doing the tests when the temp is very low. I do this because I have had a trigger pass all the tests in the house and then spent a day in the cold and had the rifle go off when I moved the safety to the "fire" position while unloading the rifle (old style safety). The best thing I ever discovered was the Jewell Trigger. I have put them on almost all of my 700's now and just can't say enough about them. They are around $220.00 but worth more to me just because of how crisp they are. You can order them already set for any weight you want and they are easily installed. Check them out if you get a chance.