Remington 700 Rifle Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
http://www.midwayusa.com/viewproduct/?productnumber=519551
http://www.midwayusa.com/viewProduct/?productNumber=522831
http://www.midwayusa.com/viewProduct/?productNumber=327769
(Set up now) Weaver 30mm Tactical 6-Hole Weaver-Style Rings Matte Low with (front) Weaver Top-Mount Scope Base #35M & (rear) Weaver Top-Mount Scope Base #36M

I bought an EGW one piece tactical rail and it was awful. It brought my scope like over a 1/4 of an inch in the front & back (http://www.midwayusa.com/viewproduct/?productnumber=147936).
I really din't like it my chick even didn't rest on the stock. This rail is to high even with low rings.






So what do you guys think?
 

·
Registered
Joined
·
190 Posts
Doesn't appear excessive to me,usually tactical or picatinny rails are a little taller,but if it doesn't
suit your cheek weld you may need to change back or find even lower rings.Weaver tactical rings
appear to be a little different in their sizing than some other companys,you might check the burris
rings?
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #3 ·
dratt1957 said:
Doesn't appear excessive to me,usually tactical or picatinny rails are a little taller,but if it doesn't
suit your cheek weld you may need to change back or find even lower rings.Weaver tactical rings
appear to be a little different in their sizing than some other companys,you might check the burris
rings?
Weaver low rings = Ring Height: .25" (measured from base of ring to bottom of scope tube)
http://www.midwayusa.com/viewProduct/?productNumber=519551
Burris low rings = Ring Height: 1/4" (measured from base of ring to bottom of scope tube)
http://www.midwayusa.com/viewProduct/?productNumber=148716
 

·
Registered
Joined
·
190 Posts
berto255 said:
dratt1957 said:
Doesn't appear excessive to me,usually tactical or picatinny rails are a little taller,but if it doesn't
suit your cheek weld you may need to change back or find even lower rings.Weaver tactical rings
appear to be a little different in their sizing than some other companys,you might check the burris
rings?
Weaver low rings = Ring Height: .25" (measured from base of ring to bottom of scope tube)
http://www.midwayusa.com/viewProduct/?productNumber=519551
Burris low rings = Ring Height: 1/4" (measured from base of ring to bottom of scope tube)
http://www.midwayusa.com/viewProduct/?productNumber=148716
WELL, those are probally as low as ring gets,egw usually builds a great product.even weaver
tactical bases are taller than normal bases. Maybe someone else has a idea?
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #5 ·
dratt1957 said:
berto255 said:
dratt1957 said:
Doesn't appear excessive to me,usually tactical or picatinny rails are a little taller,but if it doesn't
suit your cheek weld you may need to change back or find even lower rings.Weaver tactical rings
appear to be a little different in their sizing than some other companys,you might check the burris
rings?
Weaver low rings = Ring Height: .25" (measured from base of ring to bottom of scope tube)
http://www.midwayusa.com/viewProduct/?p … ber=519551
Burris low rings = Ring Height: 1/4" (measured from base of ring to bottom of scope tube)
http://www.midwayusa.com/viewProduct/?p … ber=148716
WELL, those are probally as low as ring gets,egw usually builds a great product.even weaver
tactical bases are taller than normal bases. Maybe someone else has a idea?
THE SECOND AMENDMENT
"You do not know you need it untill they come to take it away".........THOMAS JEFFERSON
"Those who hammer their guns into plows will plow for those who do not"..THOMAS JEFFERSON
Back to the begining (who came fisrt? The chicken or the egg? LOL
 

·
Registered
Joined
·
190 Posts
berto255 said:
http://www.midwayusa.com/viewproduct/?productnumber=519551
http://www.midwayusa.com/viewProduct/?productNumber=522831
http://www.midwayusa.com/viewProduct/?productNumber=327769
(Set up now) Weaver 30mm Tactical 6-Hole Weaver-Style Rings Matte Low with (front) Weaver Top-Mount Scope Base #35M & (rear) Weaver Top-Mount Scope Base #36M

I bought an EGW one piece tactical rail and it was awful. It brought my scope like over a 1/4 of an inch in the front & back (http://www.midwayusa.com/viewproduct/?productnumber=147936).
I really din't like it my chick even didn't rest on the stock. This rail is to high even with low rings.






So what do you guys think?
O.K. another option,maybe you can raise the comb? with an adjustable comb.
 
1 - 8 of 8 Posts
Top