Remington 700 Rifle Forums banner
1 - 18 of 18 Posts

·
Registered
Joined
·
403 Posts
Discussion Starter · #1 ·
Gentleman I am looking for a good cheek pad for my SPS Tactical. I have seen a few that I have been looking at , but would like to get your input as to fit and function of the brand you are using. Also would like to know where the best places online to look at. Thanks for the help in advance!
 

·
Registered
Joined
·
122 Posts
What exactly do you mean by cheek pad? Are you talking about the hard plastic screw on type or the nylon/suede type with a pouch on the off side?
For the latter I use a Triad Tactical Large Stock Pack by Eagle. Lots of room in it, and it does a good job of helping to lift my head to the scope.
The large pouch has a ton of room. In mine I've got a stripped down Otis sniper PMCS kit, MilDot Master, steel cleaning rod section, laser boresighter cartridge, bottle of CLP, Torx and hex keys for every screw on the rifle, optics cleaning kit, notepad, and 1/2" wrench.
I went with the model without loops for extra rounds. I don't care for having them exposed, and with the DBM they really aren't needed.
The pouch is long enough to hold a 700 LA bolt, and it will also hold the AICS mags if you needed it to.







My only complaint is that it doesn't have an adjustable pad system underneath like some others do. I use a Badger rail and medium rings, so it puts the glass a little high and I found it to be a lot more comfortable to put a foam pad under the pouch using some go-fast tape.
 

·
Registered
Joined
·
639 Posts
Get a TacOps one. You wont buy any other.
 

·
Registered
Joined
·
9 Posts
How about this one, works great with low or medium rings, and fit most bolt action rifles, and works for a left or right handed shooter.


bradleycheekrest.com
 

Attachments

·
Registered
Joined
·
5 Posts
I purchased the Tactical Operations Ammo Cheek Pad last year for a Remington 700™ SPS™ Tactical AAC®-SD™. This product is well designed and well constructed of durable materials. I placed a piece of foam underneath the pad to raise my eye perfectly in line with my scope and the result was a very comfortable cheek weld and perfect sight alignment. The soft velour-type fabric is easy on the face and the felt-ammo loops and zippered pouch are practical additions. Ordering was simple and delivery was speedy. Had an optionally insertable foam insert been included with this product, it would be perfect for any rifle! I highly recommend this inexpensive, quality product! Buy it and you'll need look no further.
 

·
Registered
Joined
·
5 Posts
This is dustyboots911. There is acompany called Tactical works that sell a very decent cheek rest that is completely adjustable. Just very carefully measure drill two holes and install. I think it runs about $50.00. I have one on mine and works great. They also send you a piece of padding to install on it if you want.
 

·
Registered
Joined
·
225 Posts
There is the Karsten Cheek Rest.
 

·
Registered
Joined
·
19 Posts
Gentleman I am looking for a good cheek pad for my SPS Tactical. I have seen a few that I have been looking at , but would like to get your input as to fit and function of the brand you are using. Also would like to know where the best places online to look at. Thanks for the help in advance!
I used this on my 24 overseas. This works beautifully, low cost!
Vet wrap/ sports wrap, Mole skin, And some sort of Foam, I use high density egg crate foam I got at a crafts store. All very cheap! Hope this helps! Air gun Trigger Wood Machine gun Gun barrel Outerwear Sleeve Human leg Tints and shades Shorts Sleeve Knee Thigh Tints and shades Human leg Rectangle Tints and shades Human leg Metal Personal protective equipment Rectangle Road surface Asphalt Tints and shades Automotive exterior
 
1 - 18 of 18 Posts
Top