Remington 700 Rifle Forums banner

DIY ARD = ANTI REFLECTIVE DEVICE.

40K views 38 replies 20 participants last post by  rkittine  
#1 ·
I wanted to get an ARD but could not justify spending over $60 on a meshed ring. When I got to thinking about how it works I decided to make my own. Now I have this on all my rifles and it works like a dream, it reduces glare and lens flash extremely well. There are many products being sold on the net that cost about 45-55 dollars. Using my method it will cost you $3.00 (if you own flip caps) and less than two minutes of your time, you will also have enough to do it on hundreds of rifles.


BEFORE
Image


AFTER
Image



1st.

purchase a roll of charcoal fiberglass insect screening (home depot)
Image


2nd.

cut a circle that is slightly larger than your objective (you want a little lip all around the bell of the scope)

Image


3rd.

place the cut out circle on top of your objective and try to make the lip even all around.

Image


4th.

position your flip cap over the mesh and start to slide the flip cap into place. the mesh will be held in place
and stretched tight by the flip cap.

Image


5th.

your done, it kills glare and flash very well. it is invisible when looking through the scope and when your walking back to your rifle after
checking your target you can tell the difference, all the other scopes are reflecting light and are shinning. On yours you will only see a black
hole ;)

Image
 
#11 ·
Winxp_Man said:
BK said:
More guts than I... I would be afraid to try that on a Zeiss! Member #6!
From what I can see if you throw some tape on the front bell you wouldn't hurt anything on the scope if your talking about scratching the front bell.

The mesh is very smooth it's almost like a fabric. The flipcaps do more damage to the finish of the scope than the mesh does. Now if you constantly play with it by taking it off and putting it back on anything can happen that's alot of friction.

I guess now is the time for a disclaimer just in case. Do this at your own risk lol.

:)
 
#25 ·
Brilliant!!!!!!!!!!! Serious Man, Brilliant! You should change your name to "John Moses". Great job.
"Necessity is the mother of invention." This is one of those "aha" moments when all of us that have been purchasing "flash-kills" are starting to think - "duh, why didn't I think of that?"